| |
Performance Standard |
Standard Repair |
| Roof or flashing leaks |
Roofs should not leak under normally
anticipated conditions, except high wind-driven rain. |
Correct any verified roof leaks and
all damage due to or caused by roof leaks unless caused
by excessive winds. |
| Loose or falling tiles |
None acceptable. |
Remove and correct affected area.
Tiles should be securely attached to roof by approved
methods unless these conditions are caused by excessive
winds. |
| Ridge-hip and rake tile loose
or missing |
None acceptable. |
Remove tiles and attach securely unless
these conditions are caused by excessive winds. |
| Chipped and broken tiles |
Chips no larger than 3/4" are
acceptable unless excessive in number. Broken and cracked
tiles are not acceptable. |
Replace affected tiles. However, Fieldstone
will not be held responsible if damage was
caused by homeowner. Damage must be reported within the
first 30 days of closing. |
| Wood nailers visible under
hip or ridge tiles not per manufacturer's specifications |
None acceptable. |
Remove tiles and correct conditions. |
| Irregular, uneven, and unsightly
valleys |
Valleys should be reasonably straight. |
Make cosmetic repairs as necessary.
Valley should be reasonably straight and pleasing to the
eye. |
| Unsightly and/or off-color
mortar |
None acceptable. |
Make appropriate repairs. Mortar should
be neat and reasonably uniform in color. |
| Improper exposure |
Exposure not to exceed limits recommended
by manufacturer or building code standards. |
Make appropriate repairs. |
| Vents not flashed or improperly
flashed |
Only approved roof jacks acceptable. |
Make necessary repairs. |
| Improper or inadequate flashing |
Flashing should be installed according
to manufacturer's recommendations or building code standards
and should be approved type. |
Make necessary repairs. |
| Improperly installed nailing
strips |
Strips should be installed per manufacturer's
recommendations. |
Make appropriate repairs. Nailing
strips installed per manufacturer's recommendations. |
| Inadequate underlayment |
Per manufacturer's recommendations. |
Make whatever repairs necessary to
insure proper underlayment. |
| Improper crickets (installed
by other trades) |
Improper crickets are not acceptable. |
Install cricket correctly and repair
or replace damaged roofing. |
| Tile appears to droop at eaves |
None acceptable. |
Install proper spacing at eaves. |
| Crooked vertical and horizontal
lines |
Vertical and horizontal lines should
be reasonably straight unless deliberately varied. |
Make necessary repairs. |
